Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC

  • Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC
  • Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC
  • Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC
  • Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC
  • Crowcon CO2 DETECTOR, 0-5 VOLUME CO2 VORTEX CONTROL PANEL AMMONIA ALARM SYSTEM CROWCON PLASTIC

Item #
XGB-A3-03-A-ZC-R-IC
Price
$1,520.00
Quantity
Send Page to Friend

Xgard Bright Addressable FixedPoint Gas Detector with Display by Crowcon

Xgard Bright is a versatile platform offering flammable and toxic gas detection and oxygen monitoring, while providing ease of operation and reduced installation costs.

Lowering the cost of installation, the 4-wire addressable implementation drastically reduces cabling requirements. The large OLED display allows users to easily work with Xgard Bright during install, calibration and routine maintenance without the need to open the housing.

Features

  • Supports flammable, toxic, oxygen, sensor
  • Explosion-proof housing
  • IP65 or IP66 rating (with weatherproof cap)
  • Plug-in type terminal blocks for easy wiring
  • Choice of M20 or 1/2" NPT conduit connection
  • Configuring via magnetic key
  • Non-intrusive calibration without removing access
  • MODBUS or Hart communication for remote access
  • Low power requirement (-3W max)



Enclosure material ADC 12 aluminum alloy
Dimensions 156 x 166 x 109mm (6.1 x 6.5 x 4.3inch)
Weight Aluminum alloy 1kg (2.2lbs)
Ingress protection IP65 & IP66 (with weatherproof cap)
Cable entry 2x M20 (stopping plug fi tted to left-side entry) or supplied with 1/2" NPT adapters
Power 12-30Vdc. 3W max
Electrical output 4-20mA current sink or source
RS-485 Modbus
RTU HART (optional)
Relays Alarm 1, Alarm 2, Fault
SPST contacts rated 1A 30Vdc
Sounder out 24Vdc (nominally), 250mA maximum load
Operating temperature -40°C to +70°C (-40°F to 158°F)
Note: sensor operating temperatures vary widely Refer to the sensor module datasheet or contact Crowcon for specifi c sensor data.
Humidity 0 to 95% RH, non-condensing
Repeatability +/- 2% FSD
Zero drift +/- 2% FSD per year maximum
Approval codes ATEX and IECEx
Ex II 2G Ex db IIC T6 Gb
Ex II 2D Ex tb IIIC T80°C Db
Certificate numbers: TUV 16 ATEX 7908 X; IECEx TUR 16.0035 X
Standards EN60079-0:2012 + A11:2013
EN60079-1:2014
EN60079-31:2014
IEC60079-0:2017 Edition 7
IEC60079-1:2014-06
IEC60079-31:2013
Zones Certifined for use in Zone 1 and Zone 2 areas
EMC compliance EN50270:2015